Exhaust hoses are produced in a wide range of ID sizes ( 1/2” To 12”), metals and weights. This range is available to provide the right hose for the application at the most economical cost. Interlocked exhaust hose utilizes a fully interlocked construction for strength and durability while allowing the hose to have excellent flexing characteristics. The normal configuration of exhaust hose is unpacked and fully extended. In order to minimize leakage, however, exhaust hose can be supplied packed upon request.
Temperature Range:
Stainless Steel: up to 750°C
Galvanized Steel: up to 350°C
(Service temperature may vary depending on packing material: cotton, rubber, ceramic or glass fiber yarn)
End Fittings:
Standard pipe couplings, nipples and fixed or floating flanges can be attached to exhaust hose. Any special type of fitting can be adapted to fit this hose. Attachment can be by welding, brazing or with adhesives. Additionally, hose clamps and automotive muffler clamps can be used.
Specifications:
Exhaust hoses are produced in galvanized steel and stainless steel as standard but are also available in aluminum and bronze as specials. The strip thickness of the hose weight can be selected to match the application depending upon the degree of rough handling and the abrasive conditions of the service. The size range of exhaust hose is from 1/2” to 12” inside diameter.
Features:
- High strength construction
- Balance interlocked construction
- Temperature and corrosion resistant
- Durability
- Flexibility
- Can be formed and hold its shape and easily moved
- Service life
Applications :
Some typical uses of exhaust hose are: engine exhaust and vacuum and collection service, conveying, ventilating lines, automotive exhaust, chimney liners, engine exhaust, gas & fume exhaust, tractor & generator exhaust & protective casing as safety guards for wires ,cables & tubing like rubber & stainless steel braided hoses. Plastic granules, Powder and Hot Pet in plastic processing.
| DN | Inside Diameter (mm) | Outside Diameter (mm) | Permissible Tolerance | Minimum Bending Radius (mm) +10% |
|---|---|---|---|---|
| 20 | 20 | 24.0 | ±0.3 | 100 |
| 25 | 25 | 29.5 | ±0.3 | 110 |
| 30 | 30 | 34.5 | ±0.4 | 120 |
| 32 | 32 | 36.5 | ±0.4 | 130 |
| 35 | 35 | 40.0 | ±0.4 | 140 |
| 38 | 38 | 43.0 | ±0.4 | 160 |
| 40 | 40 | 45.0 | ±0.4 | 170 |
| 45 | 45 | 50.0 | ±0.4 | 180 |
| 50 | 50 | 56.0 | ±0.5 | 200 |
| 54 | 54 | 60.0 | ±0.5 | 220 |
| 60 | 60 | 66.5 | ±0.6 | 230 |
| 65 | 65 | 72.0 | ±0.7 | 245 |
| 70 | 70 | 77.0 | ±0.7 | 260 |
| 75 | 75 | 82.0 | ±0.7 | 275 |
| 80 | 80 | 87.0 | ±0.7 | 290 |
| 90 | 90 | 97.0 | ±0.7 | 345 |
| 100 | 100 | 108.0 | ±0.8 | 380 |
| 110 | 110 | 118.0 | ±0.8 | 410 |
| 125 | 125 | 133.0 | ±0.9 | 470 |
| 130 | 130 | 138.0 | ±0.9 | 490 |
| 150 | 150 | 158.0 | ±0.9 | 545 |
| 165 | 165 | 173.0 | ±0.9 | 565 |
| 175 | 175 | 183.0 | ±0.9 | 580 |
| 200 | 200 | 208.0 | ±1.0 | 675 |
| 225 | 225 | 233.0 | ±1.0 | 765 |
| 250 | 250 | 259.0 | ±1.0 | 885 |
| 275 | 275 | 283.0 | ±1.0 | 975 |
| 300 | 300 | 309.0 | ±1.5 | 1130 |
- All technical data are subject to dimensional tolerances of ± 0.5%.
- All technical data, measured at 23°C, are general orientation values and are subject to production-related tolerances.
- Max operating pressures apply only for short periods. We reserve the right to make technical changes and color deviations.
